Large Vertical Servo Capping Machine

1. Count: record the number of presses
2. Current position: display the current position of the press plate
3. First position: start pre-pressing position
4. Second position: end position of press
5. Pressure setting: set the pressure of press, set the pressure range 1~10 tons (1000Kg~10000Kg)
6. Press mode: click to switch

Three modes: ① Position mode (Position control mode): after the press reaches the set position, the press plate stops ② Torque mode (Torque control mode): after the press reaches the set pressure, the press plate stops ③ Position + Torque mode (Position and Torque control mode): the press plate stops when the press reaches the set value first. That is, the pressing plate reaches the set position first, but the pressure does not reach the set value, and the pressing plate stops; or the pressing pressure of the pressing plate reaches the set pressure first, but the position does not reach the set value, and the pressing plate stops

7. Reset button: reset the pressing plate
8. Alarm information: when the system fails, the current alarm information is displayed
9. Start button: start the switch
10. Parameter button: use this button to enter the parameter interface.